Select Page

T-1 Integral Bi-Pin

.050″ Leg Spacing

Please Scroll Down Page to View:
T-1 Integral Bi-Pin .050″ Center Pin Spacing
T-1 Short Integral Bi-Pin .050″ Center to Center Pin Spacing
T-1 Integral Bi-Pin .100 Center to Center Pin Spacing
T-1 Short Integral Bi-Pin .100″ Center to Center Pin Spacing

Aged & Selected (AS) Lamp Option: These Lamps are aged a minimum of 16 hours at rated voltage and selected for MSCP (Brightness) tolerance prior to shipping. Please designate your selection of this option by adding AS, and the MSCP tolerance, to the part number. Example: An L-715 aged and selected to a plus-or-minus brightness tolerance of 15 percent becomes an   L-715-AS15.

Finish: Pins are tinned per MIL-STD-202, Method 208. For gold plating .00020 min. per MIL-G-45207, add GPL to part number.

L-6022/IBP5 L-680/IBP5 L-683/IBP5 L-713/IBP5 L-6150/IBP5 L-715/IBP5 L-6838/IBP5 L-2022/IBP5 L-6802/IBP5 L-6832/IBP5 L-7132/IBP5 L-6152/IBP5 L-7152/IBP5 L-7009/IBP5 L-6022/IBP10 L-680/IBP10 L-683/IBP10 L-713/IBP10 L-6150/IBP10 L-715/IBP10 L-6838/IBP10 L-2022/IBP10 L-6802/IBP10 L-6832/IBP10 L-7132/IBP10 L-6152/IBP10 L-7152/IBP10 L-7009/IBP10

T-1 Short Integral Bi-Pin
.050″ Leg Spacing

Aged & Selected (AS) Lamp Option: These Lamps are aged a minimum of 16 hours at rated voltage and selected for MSCP (Brightness) tolerance prior to shipping. Please designate your selection of this option by adding AS, and the MSCP tolerance, to the part number. Example: An L-715 aged and selected to a plus-or-minus brightness tolerance of 15 percent becomes an   L-715-AS15.

Finish: Pins are tinned per MIL-STD-202, Method 208. For gold plating .00020 min. per MIL-G-45207, add GPL to part number.

T-1 Integral Bi-Pin
.100″ Leg Spacing

Aged & Selected (AS) Lamp Option: These Lamps are aged a minimum of 16 hours at rated voltage and selected for MSCP (Brightness) tolerance prior to shipping. Please designate your selection of this option by adding AS, and the MSCP tolerance, to the part number. Example: An L-715 aged and selected to a plus-or-minus brightness tolerance of 15 percent becomes an   L-715-AS15.

Finish: Pins are tinned per MIL-STD-202, Method 208. For gold plating .00020 min. per MIL-G-45207, add GPL to part number.

T-1 Short Integral Bi-Pin
.100″ Leg Spacing

Aged & Selected (AS) Lamp Option: These Lamps are aged a minimum of 16 hours at rated voltage and selected for MSCP (Brightness) tolerance prior to shipping. Please designate your selection of this option by adding AS, and the MSCP tolerance, to the part number. Example: An L-715 aged and selected to a plus-or-minus brightness tolerance of 15 percent becomes an   L-715-AS15.

Finish: Pins are tinned per MIL-STD-202, Method 208. For gold plating .00020 min. per MIL-G-45207, add GPL to part number.